Hail guide
Paintless Dent Repair or Body Shop for Hail?
After a hail storm you will hear two kinds of answers. A body shop talks about filler, sanding and paint. A paintless dent repair shop talks about light boards and pushing dents out from behind. Both fix dents. They do it in very different ways, and for most hail damage the difference matters to your car's finish.
By the Stormsmith team

How paintless dent repair works
Paintless dent repair, often called PDR, moves the metal back into shape without touching the paint.
- Read the panel. Each panel is read under a light board. A dent bends the board's reflected lines, which shows its size and shape.
- Work it from behind. Where there is access, the dent is worked back by hand with long tools from the inside of the panel, a little at a time, until the lines run straight again.
- Or pull it from the outside. Where there is no access from behind, glue tabs are set on the dent and pulled. That is what the photo above shows.
- Check it under the same light. The repair is finished when the reflected lines run straight across the panel.
The factory paint stays on the car when the damage allows. Read the full method on our paintless dent repair page.
How a conventional body shop repair works
A conventional repair treats the dent as a surface to rebuild. The area is sanded, filled, shaped, primed and repainted, and the new paint is blended into the panels around it. When a panel has too many dents, it may be replaced and painted instead.
That is the right tool for some damage. For a car covered in shallow hail dents with the paint intact, it means a lot of new paint on panels that did not need it.
Side by side
| Question | Paintless dent repair | Conventional body shop repair |
|---|---|---|
| Factory paint | Kept when the damage allows | Sanded and repainted on each repaired area |
| Filler | None | Used to rebuild the surface |
| Best for | Hail dents with the paint intact | Cracked paint, torn or stretched metal, collision damage |
| Insurance | Goes through your claim | Goes through your claim |
Your policy decides coverage and deductible either way.
When paintless repair is not the answer
Paintless repair cannot fix everything. A panel needs paint when its paint is cracked or the metal is stretched too far. If a panel can't be repaired without paint, we tell you before any work starts, put it on the same estimate and arrange the paint work for you. The paint work may be done by a partner body shop. You keep one point of contact: us.
Some cars land in between: panels that come back by hand, and one that needs paint. The inspection is where you find out which is which.
What about dents that are not from hail?
Paintless repair is not only for hail. Door dings and small dents from everyday life often come out the same way, as long as the paint is not broken. Ask about them at your inspection.
When to call a professional
Call when you have hail dents and want to know how many panels can be repaired by hand before anyone sands your paint. The inspection is free: we read every panel under the light board, the roof and the pillars included, and explain what we see.
We handle the repair process with your insurer, and you authorize the repair. We pick up and deliver your car, and mobile service is available when the repair allows. How insurance works with us.
Want to keep your factory paint? Stormsmith Auto Hail Repair repairs hail damage with paintless dent repair across the Denver metro and the Front Range, from Fort Collins to Pueblo and east to Elizabeth. Call or text (720) 730-4931 or book a free inspection.